LiDAR to 3D print: using laser-survey data
National LiDAR surveys measure real roof and ground heights from aircraft. This guide explains what that data is, why it cannot be printed directly, and how the tool cleans it into a solid model.
What airborne LiDAR is
LiDAR stands for light detection and ranging. An aircraft flies over an area and fires laser pulses at the ground, many times a second. Each pulse returns after hitting a roof, a tree, a road or bare earth, and the time of return gives the distance. Together, millions of points describe the shape of the land and what stands on it.
National mapping agencies fly these surveys and publish the results as open data. They are measured from the air, so they show the tops of things well, and walls and the undersides of overhangs poorly.
Surface models and terrain models
Two height grids are made from the points. A surface model records the first thing the laser hit: roofs, treetops, bridges. A terrain model records the bare ground, with buildings and vegetation removed. Both are grids of height values, one per small square of the map.
Subtracting terrain from surface gives the height of what stands on the ground. A roof that is 12 m higher than the ground beside it has a difference of 12 m. The tool uses this difference to set roof levels for buildings in covered regions.
Why raw scans print badly
A raw surface model is full of detail a printer cannot use. Roofs are slightly bumpy, chimneys and dormers appear as small spikes, and vegetation next to a wall blurs the edge. Printed directly, this would give sloping, noisy walls and tiny features that fail at city scale.
Raw scans are also not solid. They describe only the top surface. A printer needs a closed shape with walls and a base, so the surface must be turned into a solid before it can be sliced.
How levels are cleaned into flat plates
The tool takes each mapped building outline and extrudes it straight up, so the walls are true vertical planes. The measured roof heights decide the tops. Courtyards and setbacks are traced into straight-edged flat levels, so a stepped roof becomes a few clean plates rather than a noisy surface.
The tallest and most complex buildings in a frame are sampled in extra fine detail, so landmarks keep their silhouette. Ordinary buildings are simplified more. The result prints cleanly while the heights still come from the measured survey.
Which regions are covered
The tool reads national or regional laser surveys in these places. Each is published by a public agency, and the tool shows the source where it is used.
- France: IGN LiDAR HD.
- Norway: Kartverket.
- The Netherlands: AHN.
- England: Environment Agency.
- North Rhine-Westphalia, Germany: Geobasis NRW.
- Flanders, Belgium: Digitaal Vlaanderen.
What happens outside these regions
Places such as the United States, Spain, Japan and Berlin are outside the tool's laser-survey regions. There, heights are estimated from OpenStreetMap tags for building height and number of floors, and some landmarks use volunteer-made 3D models.
The tool labels these models as estimated. They can still make a good print, but tall buildings may not match their real heights, and you should not treat the model as measured data.
Questions
- Is LiDAR data free to use?
- The surveys the tool reads are published by public agencies as open data. The tool uses them to set building and ground heights, and shows the source and licence where each is used. You do not need an account or to download any survey files yourself.
- How recent is the LiDAR data?
- It depends on the region and when the survey was flown. A building built or changed after the flight will not show its new shape. The model shows the city as it was when the survey was made, so check recent landmarks in the preview.
More guides: How to 3D print a city: a step-by-step guide · From map to STL: how a city becomes a 3D print · Best print settings for 3D-printed city models