3D print York

York packs a great Gothic minster inside a web of narrow medieval streets. Frame the Minster and the old centre to download an STL with heights measured by Environment Agency LiDAR.

Free · no account · STL in millimetres

3D-printable city model of York, centred on York Minster and the medieval streets
York, York Minster and the medieval streets — the model as exported, 700 m across
Heights
Measured by laser survey
Source
Environment Agency National LIDAR Programme
Frame
700 × 700 m
At 180 mm
1 : 3,889 · 20.9 mm tall
Buildings
367

A York model you can print

York is small enough that a 700 m frame holds most of its historic core. The street pattern is irregular and tight, with lanes that bend and meet at odd angles, and the buildings are low and closely packed. On a printed model this looks like a dense tangle around one huge shape. It is a good way to see how a medieval town grows around a cathedral.

The frame is centred on York Minster. The Minster is the largest building by a wide margin, with its long nave and the central tower, and the print shows it standing clear of everything around. To the north-west is Bootham Bar, one of the old city gates, and the narrow lanes of the Shambles lie to the south-east. Expect the smallest lanes to close up at modest print sizes.

In this frame

  • York Minster
  • The Shambles
  • Bootham Bar

Printing York

  • Print at 200 mm or larger. The narrow lanes around the Minster are only a few millimetres wide at small sizes.
  • Leave height exaggeration at 1x. The Minster is already the dominant shape, and York has few other tall buildings.
  • Switch trees off for the old centre. The streets are tight, and crown domes can hide the lanes.
  • Use a 0.4 mm nozzle with 0.12 to 0.16 mm layers if you want the cathedral towers to look sharp.
Will the Shambles print as a narrow street?
Only just. It is a very narrow lane, only a few metres wide in reality, so at 700 m and 180 mm it becomes a gap well under a millimetre wide. Print larger, or draw a smaller frame, if you want it to stay open.
Where does the York height data come from?
From Environment Agency airborne laser surveys, which cover England. Roof and ground heights are measured. The tool turns courtyards and setbacks into flat, straight-edged levels, and samples tall buildings like the Minster in finer detail.

More cities to print

All cities