3D print Cologne

Cologne Cathedral sits right beside the main station, with the Rhine just beyond. Frame them together for an STL with roof heights measured in the Geobasis NRW airborne laser survey.

Free · no account · STL in millimetres

3D-printable city model of Cologne, centred on the Cathedral and central station
Cologne, the Cathedral and central station — the model as exported, 700 m across
Heights
Measured by laser survey
Source
Geobasis NRW DOM1 / DGM1
Frame
700 × 700 m
At 180 mm
1 : 3,889 · 43.5 mm tall
Buildings
522

A Cologne model you can print

Cologne was heavily damaged in the Second World War and rebuilt, so the city beside the cathedral is a mix of postwar blocks, a few surviving historic buildings and modern museums. A print shows this as a fairly even field of mid-rise blocks pierced by one enormous Gothic mass. It is one of the clearest examples of a single building dominating a city model, and the Rhine adds a strong straight edge.

The 700 m frame is centred on the Cathedral and the central station. The Cathedral has a pair of tall spires over a long nave, and the station tracks run beside it toward the Hohenzollern Bridge, which crosses the Rhine as a flat deck. The Museum Ludwig stands just north of the cathedral. The twin spires are the most delicate part of the print.

In this frame

  • Cologne Cathedral
  • Köln Hauptbahnhof
  • Hohenzollern Bridge
  • Museum Ludwig

Printing Cologne

  • Print at 200 mm or larger. The cathedral's twin spires are thin, and larger prints give them more strength.
  • Switch water on to cut the Rhine at the east edge. It balances the cathedral on the other side.
  • Rotate the frame to follow the Rhine bank so the bridge and the river run cleanly across the print.
  • Keep height exaggeration at 1x. The cathedral is already far taller than anything around it.
Will the Cologne Cathedral spires print?
Yes, but they are the most delicate parts. The tool samples tall buildings in extra detail, so the silhouette keeps its two spires, but the Gothic tracery is not included. Print larger, slow down near the top and use a cooling fan.
Is the Cologne data measured?
Yes. North Rhine-Westphalia is covered by Geobasis NRW airborne laser surveys, and the tool reads roof and ground heights from them. Courtyards and setbacks are simplified into flat, straight-edged levels. Any estimated area would be labelled.

More cities to print

All cities