3D print Paris
Search Paris, frame Notre-Dame and the Île de la Cité, and download a solid STL in minutes. Heights come from IGN LiDAR HD, so the cathedral and the Haussmann rooflines are measured, not guessed.
Free · no account · STL in millimetres

- Heights
- Measured by laser survey
- Source
- IGN LiDAR HD
- Frame
- 800 × 800 m
- At 180 mm
- 1 : 4,444 · 19.9 mm tall
- Buildings
- 803
A Paris model you can print
Paris is built in dense blocks of similar height, with a handful of landmarks standing clear of the roofline. That suits a city model: the even blocks form a calm base and the few tall shapes read at once. The Seine splits the frame in two, and the island at its centre gives the print a natural focal point. Because buildings fill almost every plot, the finished model is compact and rigid, with few thin parts.
The suggested 800 m frame centres on Notre-Dame and the Île de la Cité. You will recognise the cathedral's twin-tower west front, its long nave, the Palais de Justice and the bridges that link both banks to the island. The Seine is cut below its banks, so the river reads as a true channel. The survey shows the cathedral as it stood when it was flown, so check the roof against what you expect.
In this frame
- Notre-Dame de Paris
- Île de la Cité
- Palais de Justice
- Pont Neuf
- Sainte-Chapelle
Printing Paris
- Keep the frame near 800 m to hold the island and both quays. Go wider only if you accept smaller buildings on the print.
- Switch water on. The Seine is the main shape in this frame, and the cut banks make the island easy to read.
- Leave height exaggeration at 1x. Paris roofs are close in height, so extra exaggeration mostly just stretches the cathedral towers.
- Turn trees off for a cleaner print. The quays and courtyards show better without crown domes on top of them.
Questions
Paris, in detail
- Are the Paris heights measured or estimated?
- Measured. In France the tool reads IGN LiDAR HD, an airborne laser survey, and takes roof heights from it. Courtyards and setbacks become flat, straight-edged levels. Where a survey is missing, the tool falls back to estimates from map tags and labels them as estimated.
- Will Notre-Dame print with its flying buttresses?
- Only as a solid mass. The model is a height-style solid with no see-through details, so thin buttresses merge into the roof levels and walls around them. The cathedral keeps its footprint, its two towers and its overall silhouette, but not carved detail or open arches.