3D print San Francisco
The Financial District packs towers against steep hills and the Embarcadero. Frame it for a solid STL. Building heights are estimated from OpenStreetMap tags and labelled as estimated.
Free · no account · STL in millimetres

- Heights
- Estimated from map data
- Source
- OpenStreetMap
- Frame
- 900 × 900 m
- At 180 mm
- 1 : 5,000 · 68.2 mm tall
- Buildings
- 615
A San Francisco model you can print
San Francisco is a city of steep slopes, and the Financial District sits at the foot of several of them. A print with terrain on shows towers beside rising ground, and Market Street cuts a diagonal across the otherwise regular grid. The bay edge adds a flat water boundary. Heights are estimated from OpenStreetMap building height and floor tags, not from a laser survey, so treat tall towers as close approximations.
The 900 m frame is centred on the Financial District. You will find the Transamerica Pyramid and the Embarcadero Center to the north, Salesforce Tower to the south-east, and Market Street running toward the bay. The Pyramid is a sloped tower, but straight extrusion makes plain buildings into prisms, so it may print as a block unless a mapped 3D model exists.
In this frame
- Transamerica Pyramid
- Salesforce Tower
- Embarcadero Center
- Market Street
Printing San Francisco
- Keep terrain on. The slope of Nob Hill and Telegraph Hill is part of what makes this frame recognisable.
- Print at 200 mm or larger. Slim towers like Salesforce Tower are the fragile points of the model.
- Switch water on if the frame includes the bay edge, so the waterfront is cut below the quay.
- Check the tall towers in the preview. Estimated heights may differ from reality, so compare them with your own knowledge.
Questions
San Francisco, in detail
- Why is the San Francisco model estimated?
- Because the tool has no national laser-survey source for the United States. It uses building outlines from OpenStreetMap and Overture Maps and estimates heights from height and floor tags. It labels the model as estimated, and some landmarks use volunteer-made 3D models.
- Will the Transamerica Pyramid look like a pyramid?
- Possibly not. Buildings are extruded straight up from their outlines, which would turn a tapered tower into a prism. If OpenStreetMap holds a volunteer 3D model of the tower, the tool can use it, but check the preview before printing.