3D print Marseille
Marseille wraps its old harbour in steep hills. Frame the Vieux-Port, switch on terrain and water, and download a solid STL with roof heights taken from the IGN LiDAR HD survey.
Free · no account · STL in millimetres

- Heights
- Measured by laser survey
- Source
- IGN LiDAR HD
- Frame
- 900 × 900 m
- At 180 mm
- 1 : 5,000 · 17.3 mm tall
- Buildings
- 1,581
A Marseille model you can print
Few French cities have a shape as strong as Marseille's. The Vieux-Port is a rectangular basin cut into the shoreline, and the city climbs the hills on both sides of it. A print shows this well: the flat water of the harbour sits low, while neighbourhoods step upward around it. The mix of tight old streets and larger blocks gives the model a lot of texture without any fragile parts.
The suggested 900 m frame is centred on the Vieux-Port. You will see the long quays, the entrance guarded by Fort Saint-Jean, and the Hôtel de Ville on the north quay. La Canebière leaves the head of the basin toward the east. Notre-Dame de la Garde stands on its hill just south of the frame, so shift the frame south if you want it included.
In this frame
- Vieux-Port
- Fort Saint-Jean
- Hôtel de Ville de Marseille
- La Canebière
Printing Marseille
- Leave terrain on. The hills are half of what makes Marseille recognisable, and they give the print strong depth.
- Switch water on so the Vieux-Port is cut as a clean basin. Its rectangular outline is the first thing people spot.
- Move the frame south by a few hundred metres if you want Notre-Dame de la Garde on its hill included.
- Use no height exaggeration at first. The real hills already give relief, and extra scale can make slopes look steeper than they are.
Questions
Marseille, in detail
- Is Marseille built from measured data?
- Yes. France is covered by IGN LiDAR HD, an airborne laser survey, so roof heights and ground levels are measured. Courtyards and setbacks are traced into flat, straight-edged levels so the print stays clean. The tool labels any area where it had to estimate instead.
- Do the boats in the Vieux-Port appear?
- No. The model contains buildings, terrain, water, parks and optional trees. The harbour is cut as a water basin, with quays and piers shown, but individual boats are not part of the data and will not appear on the print.