3D print Rotterdam

Rotterdam was rebuilt after the Second World War, and its centre is a cluster of towers and large blocks. Frame the high-rises and download an STL with heights measured in the Dutch AHN survey.

Free · no account · STL in millimetres

3D-printable city model of Rotterdam, centred on the city centre high-rises
Rotterdam, the city centre high-rises — the model as exported, 900 m across
Heights
Measured by laser survey
Source
Actueel Hoogtebestand Nederland (AHN)
Frame
900 × 900 m
At 180 mm
1 : 5,000 · 24.8 mm tall
Buildings
480

A Rotterdam model you can print

Unlike most Dutch cities, Rotterdam has a skyline. The centre was largely rebuilt in the twentieth century with wide streets and large modern blocks, then extended upward with glass towers. A printed model shows this clearly: a flat base with a cluster of tall shapes that read at once. The Nieuwe Maas river is wide, so water gives the model a strong edge.

The 900 m frame is centred on the city centre around Blaak. You will see the arched Markthal, the Cube Houses tilted on their poles beside it, and the wide streets and towers of the Coolsingel area to the west. Rotterdam is flat and the towers are tall, so they are the thinnest parts of the print. The Erasmus Bridge lies south of this frame.

In this frame

  • Markthal
  • Cube Houses
  • Rotterdam City Hall
  • Blaak

Printing Rotterdam

  • Leave height exaggeration at 1x. The towers already stand out against the flat ground, and more scale makes them fragile.
  • Print at 200 mm or larger if you want slim towers to keep a sturdy cross-section.
  • Shift the frame south by about 700 m if you want the Erasmus Bridge and the river in view.
  • Print slowly near the top of the towers, and use a cooling fan so that thin sections do not droop.
Are the Rotterdam towers measured?
Yes. The Dutch AHN airborne laser survey covers Rotterdam, and the tool reads roof heights from it. The tallest and most complex buildings in a frame are sampled in extra fine detail so landmark silhouettes are kept. Setbacks become flat levels.
Will the Cube Houses print as cubes?
Roughly. The model follows each building's mapped outline and measured top, so the tilted cubes appear as small angular blocks. The model is a solid, so you will not get the windows, poles or interior, only the overall shape.

More cities to print

All cities