3D print Manchester

Manchester's Victorian centre is built on a dense grid of red-brick blocks. Frame the Town Hall and Albert Square and download an STL with roof heights measured by Environment Agency LiDAR.

Free · no account · STL in millimetres

3D-printable city model of Manchester, centred on the Town Hall and Albert Square
Manchester, the Town Hall and Albert Square — the model as exported, 800 m across
Heights
Measured by laser survey
Source
Environment Agency National LIDAR Programme
Frame
800 × 800 m
At 180 mm
1 : 4,444 · 31.6 mm tall
Buildings
461

A Manchester model you can print

Manchester grew with the cotton trade, and the centre still shows it: large warehouse and mill-era blocks, wide commercial streets and civic buildings built to impress. A printed model catches this solid, heavy character. Blocks are large and mostly mid-rise, which means few fragile parts, and a few modern towers rise above the older fabric. The result is a sturdy print with a strong mix of old and new.

The 800 m frame is centred on the Town Hall and Albert Square. The Town Hall is a large Gothic building with a clock tower, and the open square lies in front of it. Next to it is the circular Central Library, with the Town Hall Extension behind. The streets to the north and east lead toward the shopping and office blocks of the city centre.

In this frame

  • Manchester Town Hall
  • Albert Square
  • Manchester Central Library
  • Town Hall Extension

Printing Manchester

  • The Town Hall clock tower is the finest feature. Print at 180 mm or larger so that it keeps its shape.
  • Keep height exaggeration at 1x. Modern towers already stand out against the low Victorian blocks.
  • Switch parks on to show the squares and gardens in the centre as slightly raised plates.
  • Large blocks print well. Use two or three perimeters so that the wide, flat roofs stay stiff.
Is the Manchester model measured?
Yes. England is covered by Environment Agency airborne laser surveys, and the tool takes roof and ground heights from them. Courtyards and setbacks are traced into flat, straight-edged levels, and the tallest buildings are sampled in finer detail.
Can I add more of the city centre?
Yes. Draw a larger rectangle, up to 4 km on a side, and the model grows. At the same print size the buildings shrink, so raise the print size or accept less detail. A frame of 1 to 1.5 km is a good compromise.

More cities to print

All cities