3D print Chicago

The Loop packs Chicago's skyscrapers inside a tidy grid and a river bend. Frame it for a solid STL. Heights are estimated from OpenStreetMap tags and are labelled as estimated.

Free · no account · STL in millimetres

3D-printable city model of Chicago, centred on the Loop
Chicago, the Loop — the model as exported, 900 m across
Heights
Estimated from map data
Source
OpenStreetMap
Frame
900 × 900 m
At 180 mm
1 : 5,000 · 64.4 mm tall
Buildings
374

A Chicago model you can print

Chicago is the city that made the skyscraper a standard form, and the Loop shows it in a compact area. Tall blocks sit on a regular north-south grid, the river bends along the north and west edges, and the result is one of the most legible skyline prints you can make. The grid already aligns to north, so you do not need to rotate the frame. Heights are estimated from OpenStreetMap tags.

The 900 m frame is centred on the Loop. You will see the Chicago Theatre and the Cultural Center on the east side, the Board of Trade Building in the south, and the Willis Tower lies just outside the western edge. Because the data is estimated, tall towers may not match their real heights exactly. The tallest towers are slim, so they need a larger print to survive.

In this frame

  • Chicago Board of Trade Building
  • Chicago Theatre
  • Chicago Cultural Center

Printing Chicago

  • No rotation needed. The Loop grid already runs north-south, so a plain square frame fits it.
  • Switch water on to cut the Chicago River along the north and west edges.
  • Print at 200 mm or larger. The tallest towers are slim, and they are the first parts to break.
  • Compare the preview with what you know of the skyline. Estimated heights can differ from the real ones.
Are Chicago's tall buildings accurate?
Only as accurate as the map tags. Chicago is outside the laser-survey regions, so the tool estimates heights from OpenStreetMap building height and floor counts and labels them as estimated. Towers with good tags look right, and others may be a little off.
Will the Loop print without supports?
In almost all cases, yes. Buildings are extruded straight up, so walls are vertical and the model sits flat on its base. The risk is slim towers, which can break or wobble at small sizes, so print larger and handle with care.

More cities to print

All cities