3D print Oslo

Oslo meets its fjord at Bjørvika, where new towers rise beside the Opera House. Frame this waterfront and download a solid STL with roof heights measured in the Kartverket airborne survey.

Free · no account · STL in millimetres

3D-printable city model of Oslo, centred on the Opera House and Bjørvika waterfront
Oslo, the Opera House and Bjørvika waterfront — the model as exported, 900 m across
Heights
Measured by laser survey
Source
Kartverket Høydedata (NHM)
Frame
900 × 900 m
At 180 mm
1 : 5,000 · 25.2 mm tall
Buildings
203

A Oslo model you can print

Oslo is a low city with a modern waterfront. In Bjørvika the old harbour has been rebuilt with glass and stone, so the print mixes broad quays, large blocks and a row of tall, slim towers. The fjord supplies a big flat water area, and the land rises gently to the north. That contrast between open water and compact buildings makes the model easy to read, even at a small size.

The 900 m frame is centred on the Opera House and Bjørvika. The Opera House is a wide, low building that meets the water, and it reads well from above. Behind it you will find the row of tall blocks nicknamed the Barcode, the Munch museum and the Deichman library on the waterfront, and Oslo Central Station and its tracks just to the north.

In this frame

  • Oslo Opera House
  • The Barcode
  • MUNCH
  • Deichman Bjørvika
  • Oslo Central Station

Printing Oslo

  • Switch water on. The fjord fills a large part of the frame and gives the Opera House its setting.
  • The Barcode towers are tall and narrow. Print at 180 mm or larger and expect them to be the finest parts.
  • Rotate the frame so a long edge runs along the shoreline. The waterfront then fills the print without empty corners.
  • Keep height exaggeration at 1x. The towers are already tall compared with the low buildings around them.
Where does the Oslo height data come from?
From Kartverket, the Norwegian mapping authority, which publishes airborne laser surveys of the country. The tool reads roof and ground heights from it, so Oslo is measured rather than estimated. Courtyards and setbacks are cleaned into flat, straight-edged levels.
Is the Opera House sloping roof included?
The model follows the building's footprint and survey heights, but it is a solid with flat-sided levels, so very fine slopes and surface detail are simplified. You will recognise the shape and its low profile at the water's edge, not its exact surface.

More cities to print

All cities